When unboxing the recorder:
- Connect power to back of unit.
- Connect monitor via HDMI or VGA
- Connect mouse to back or front USB port.
- Connect Cat5 between LAN port and onsite router (or network switch)
- Connect cameras (coax or IP)
1. Switch on recorder, await initilisation then choose Language and region.
2. Agree to Privacy Statement
3. Set the timezone, time format andn enable DST
4. Setup an Admin password
5. Create security question
6. Format hard drive
7. Configure network settings (enable DHCP providing a router is connected)
DNS Should be :
- Preferred = Same number as Gateway
- Alternate = 8.8.8.8
8. Once configured you can add cameras over network once discovered by the recorder.
9. Set the recording schedule to dictate what the unit records (General, Motion, Alarm, AI)
10. Scan QR code using Super live plus mobile app to link the recorder to mobile phone.
11. Enable or disable cloud updating.