Modifying Device IP Address

⚫ You can modify IP address of one or multiple devices in one time. This section is based on modifying IP addresses in batch.
⚫ Modifying IP addresses in batch is available only when the corresponding devices have the same login
password.
Step 1 Do Step 1 to Step 4 in "2.1 Initializing Device" to search devices in your network segment.

⚫After clicking Search setting, please make sure the username and password are the same as what you
set during initialization, otherwise there will be "wrong password" notice
Step 2 Select the devices whose IP addresses need to be modified, and then click Modify IP.
The Modify IP Address interface is displayed. See Figure 2-3.

Step 3 Select Static mode and enter start IP, subnet mask and gateway.

The Modify IP Address interface is displayed. See Figure 2-3.
⚫ IP addresses of multiple devices will be set to the same if you select Same IP.
⚫ If DHCP server is available in the network, devices will automatically obtain IP addresses from DHCP
server when you select DHCP.
Step 4 Click OK.